• PPE & lifejacket compliance on the drill floor and in walk-to-work transfer zones
• Behavioural safety (phone use, smoking, running)
• Ergonomics on repetitive operations
• Fall and overboard detection at moonpool, derrick and deck edges

• Machine restricted zones around iron roughneck, tongs and top drive
• Crane swing radius enforcement
• Line-of-fire under suspended loads and during tripping
• Deck-tractor and pedestrian separation in pipe-handling areas

• Restricted-area enforcement at moonpool, drill floor and DP control rooms
• Credentialed access at gangways, boat landings and helideck
• Open/closed door and hatch status on ballast tanks and voids
• Clean pedestrian paths and escape routes on decks

• Smoke & fire detection in machinery spaces and living quarters
• Worker-down detection across decks and the drill floor
• Automatic headcount at muster stations vs POB list
• Helideck and gangway approach blockage and clearance verification

Waterside & approach monitoring

Detects small-craft approach, unidentified vessel proximity and standoff-distance breaches around the rig or SOV, correlating radar-blind visual bearings so the bridge sees an approach before it closes.

Restricted-area & muster-point monitoring

Flags presence in restricted deck zones, hazardous-area boundaries and muster points outside declared activity windows, so control-room operators see who is where without walking the deck.

Crew transfer & gangway access control

Verifies walk-to-work gangway and basket transfers against the crew manifest, surfacing unaccounted movements and giving the OIM a live personnel-accountability picture across both hulls.

Helideck access & clearance verification

Detects personnel and objects inside the helideck perimeter during approach and departure windows, and flags clearance state so flight-following and the HLO share the same view.

Boat-landing & swing-rope transfer monitoring

Surfaces transfers at boat landings and swing-rope points, detecting unattended personnel, missing lifejackets and transfers outside authorised sea-state and daylight windows.

Moonpool, derrick & drill-floor zone access

Correlates role and permit state against presence in moonpool, derrick and drill-floor red zones, flagging entries by personnel without a matching authorisation.

Surveillance integrity & camera tampering

Detects lens obstruction, defocus, repositioning, spray and signal loss across the camera estate and raises a tamper event, so gaps in coverage are surfaced rather than discovered later.

Critical equipment, OT & comms tampering

Flags unauthorised interaction with drilling-package cabinets, DP consoles, satellite and radio equipment, and marine switchgear, with a timestamped visual record of who approached.

Unattended object detection

Detects bags, containers and equipment left in sensitive deck zones, machinery spaces and escape routes, and correlates them back to the person who placed them.

Multi-camera reconstruction & evidence

Reconstructs any incident across every camera on the rig or vessel, with appearance search and export-ready, auditable evidence packs for investigation and class or flag-state review.

Crane & lifting-cycle monitoring

Times every lift from hook-up to set-down, flagging idle hook time, repeated re-rigs and lifts held for sea state, so the deck crew and shore team see where cycle time actually goes.

Deck congestion & laydown utilisation

Measures occupancy across pipe decks and laydown areas, surfacing congestion that slows backloading and showing which zones sit unused across a rotation.

Pipe handling & tripping activity

Tracks stands racked, tripping speed and connection times from the drill floor camera, giving the driller and town an objective record without additional instrumentation.

Mud system & shaker-area monitoring

Detects shaker screen blinding, overflow and spill on the mud-processing deck, and correlates activity with solids-control manning.

POB counting & muster verification

Reconciles automatic headcount at muster stations against the POB list, flagging late and missing persons and reporting muster-completion times per drill.

Helideck turnaround timing

Times helideck cycles from approach to clear, capturing deck-clear delays and refuelling holds that push flights outside their slot.

Supply-boat arrival, departure & cargo transfer

Logs supply-boat alongside and off time, verifies container and basket transfers against the manifest, and flags backload left on deck.

Walkway & escape-route obstruction

Detects obstructions on walkways, stairwells and escape routes across decks and machinery spaces, and flags them for the housekeeping round.

PPE compliance on deck

Correlates PPE state — helmet, coverall, lifejacket, eye and hand protection — against the zone a person is standing in, and reports compliance by area and by shift.

Dropped-object zone monitoring

Flags presence beneath suspended loads, derrick work and overside lifts, and detects objects falling into designated dropped-object zones.

Equipment idle time & utilisation

Builds utilisation profiles for cranes, deck machinery and handling equipment from visual activity, showing where capacity is stranded across a rotation.

Weather-related deck-hazard detection

Detects standing water, ice, spray and unsecured items on deck as conditions change, and surfaces them before the next watch takes over.

PPE & Personal Compliance

Helmet, vest, gloves, eyewear, hearing and respiratory protection, checked per worker per zone.

View application →

Work at Height & Line of Fire

Edges, openings, scaffolds, suspended loads and dropped-object zones.

View application →

Emergency & Incident Response

Fire, smoke, worker-down and evacuation-route readiness.

View application →

Occupancy, Counting & Flow

Headcount, crowding, queues, dwell and movement patterns.

View application →