Quayside, Yard & Marine — red zones, stacks and the vessel interface
Container, Ro-Ro, bulk and liquid-bulk terminals each carry a different exclusion geometry. Fogsphere detects presence inside the active zone, not merely presence nearby.
Safety
Protect people where aircraft, cranes, vehicles and passengers share the same ground.
Security
Hold the perimeter, the waterside, the gate and every restricted zone.
Operational Intelligence
Read turn time, stand and berth utilisation and passenger flow from cameras already in place.
How Fogsphere sees a quayside and container yard
A live operations layer on top of the cameras already covering your quays, stacks, berths and terminal roads.
Key use cases
Real-world applications for a safer quayside and a better-run yard.
Crane red zones
Pedestrian and vehicle segregation
PPE by zone and task
Perimeter and waterside
Restricted-area control
Camera assurance
Yard occupancy and dwell
Berth productivity
Equipment utilisation
Segregation, speed and the stack
Pedestrian and vehicle segregation
Pedestrian and vehicle segregation, near-miss and speed alerts across quayside, yard, rail and internal roads.
Container yard exclusion zones
Container yard exclusion zones and stack-area intrusion, checked against the block geometry you configure.
Crane red zones
Red zones under cranes and suspended loads — the detection is zone-aware, not proximity-based.
PPE by zone and task
PPE by zone and task, including contractor compliance across berth, yard, shed and workshop.
Work at height
Harnesses, gangways, fall detection and access to elevated walkways and lashing platforms.
Housekeeping
Spills, debris and blocked walkways in sheds, quay aprons and lashing areas.
Mooring, ramps, bulk and liquid bulk
Mooring and vessel interface
Mooring snap-back zones, gangway safety and the vessel-to-terminal interface during berthing and departure.
Ro-Ro ramps
Reversing risk on Ro-Ro ramps, pedestrians in vehicle lanes and unsafe loading sequence at the linkspan.
Bulk terminals
Conveyor zones, dust, smoke and fire indicators across bulk handling, hoppers and transfer towers.
Liquid bulk and tank farms
No-smoking control, tank-farm perimeter, spill-like anomalies and unsafe activity in the manifold area.
Warehouse and CFS
Forklift-pedestrian near-miss, safe stacking and blocked aisles in warehouse and container freight stations.
Fire lanes and weather
Fire lanes, muster points, evacuation-route readiness and weather-triggered alerts across exposed areas.
Occupancy, dwell and equipment utilisation
Yard occupancy and dwell
Yard occupancy, dwell time and congestion heatmaps by block, row and reefer area.
Berth productivity
Berth productivity and vessel service milestones, from first lift to last lift.
Equipment utilisation
Crane and equipment idle time and utilisation, and where the constraint sits across the shift.
Ro-Ro, bulk and reefer flow
Ro-Ro, bulk and reefer flow monitoring, including reefer plug-in state and dwell where visible.
Disruption command view
Live command view during disruption — blocked lanes, stopped equipment and emergency-route status.
After-action evidence
Timestamped event packages for claims, demurrage disputes and post-incident review.
Application clusters behind this focus area
Ready to see every red zone, stack and berth in one place?
Across the transportation estate
Explore our transportation focus areas.
Runway and taxiway incursion, FOD, wildlife, apron stands, GSE proximity and turnaround milestones.
Passenger flow, queues, escalators and jet bridges, baggage halls, kerbside and car park.
Crane red zones, container stacks, mooring snap-back, Ro-Ro ramps, bulk and liquid bulk.
ISPS restricted areas, waterside approach, gate ANPR, truck turn time and cargo tamper evidence.